oi

added the ability to use a config file.

cimp.bas

@@ -36,16 +36,16 @@ if ipc_status = 0 then
     ' --- CLIENT MODE ---
     dim cmd_msg as string
 
-   Select Case command$(1)
+    select case command$(1)
-   		Case "--soundbank"
+        case "--soundbank"
             cmd_msg="SOUNDBANK:"+_cwd$ +slash+command$(2)
-        Case "--next"
+        case "--next"
             cmd_msg="NEXT"
 
-        Case "--prev"
+        case "--prev"
             cmd_msg="PREV"
 
-        Case "-v", "--volume"
+        case "-v","--volume"
             cmd_msg="VOL:"+command$(2)
 
         case "--pause"
@@ -62,30 +62,34 @@ if ipc_status = 0 then
             cmd_msg="REPEAT"
         case "--repeat-1"
             cmd_msg="REPEAT1"
+        case "--repeat-off"
+            cmd_msg="REPEATOFF"
         case "--nyan"
             cmd_msg="NYAN"
-        Case "--add"
+        case "--nyan-off"
-            For i = 2 To _commandcount
+            cmd_msg="NYANOFF"
+        case "--add"
+            for i=2 to _commandcount
                 cmd_msg="ADD:"+_cwd$ +slash+command$(i)
                 ipc_send_message cmd_msg
-            Next i
+            next i
-            System
+            system
 
-        Case "--playlist"
+        case "--playlist"
             cmd_msg="GET_PLAYLIST"
 
-        Case Else
+        case else
             ' Default behavior: Resolve target file/playlist and replace active queue
             cmd_msg="PLAY:"+_cwd$ +slash+command$(1)
             ipc_send_message cmd_msg
-            If _commandcount > 1 Then
+            if _commandcount>1 then
-                For i = 2 To _commandcount
+                for i=2 to _commandcount
                     cmd_msg="ADD:"+_cwd$ +slash+command$(i)
                     ipc_send_message cmd_msg
-                Next i
+                next i
-                System
+                system
-            End If
+            end if
-    End Select
+    end select
 
     ' Send instruction to the main player instance
     ipc_send_message cmd_msg
@@ -133,6 +137,8 @@ dim shuffle as integer
 dim nooutput as integer
 dim timevis as integer
 dim nyan as integer
+dim server as integer
+
 dim marqueeoffset as integer
 dim i as integer
 
@@ -167,6 +173,40 @@ timevis=1
 nyan=0
 marqueeoffset=0
 
+
+dim config as string
+config=GetConfig("cimp.conf")
+if _fileexists(config) then
+    dim li as string
+    dim fh as integer
+    fh=freefile
+    open config for input as fh
+    while not eof(fh)
+        line input #fh,li
+        if left$(li,1)="#" then _continue
+        select case _trim$(left$(li,instr(li,"=")-1))
+            case "volume"
+                volume=val(_trim$(mid$(li,instr(li,"=")+1)))/100
+            case "shuffle"
+                if _trim$(mid$(li,instr(li,"=")+1))="true" then shuffle=-1 else shuffle=0
+            case "repeat"
+                if _trim$(mid$(li,instr(li,"=")+1))="true" then repeat=-1 else repeat=0
+                if _trim$(mid$(li,instr(li,"=")+1))="1" then repeat=1
+            case "server"
+                if _trim$(mid$(li,instr(li,"=")+1))="true" then server=-1 else server=0
+            case "nyan"
+                if _trim$(mid$(li,instr(li,"=")+1))="true" then nyan=-1 else nyan=0
+            case "nooutput"
+                if _trim$(mid$(li,instr(li,"=")+1))="true" then nooutput=-1 else nooutput=0
+            case ""
+            case else
+                print "Config not understood:"
+                print li
+        end select
+    wend
+    close fh
+end if
+
 for i=1 to _commandcount
     select case command$(i)
         case "-v","--volume"
@@ -243,14 +283,18 @@ while keyin<>27
             repeat=-1
         elseif client_cmd="REPEAT1" then
             repeat=1
+        elseif client_cmd="REPEATOFF" then
+            repeat=0
         elseif client_cmd="SHUFFLE" then
             keyin=asc("s")
         elseif client_cmd="NYAN" then
             nyan=not nyan
+        elseif client_cmd="NYANOFF" then
+            nyan=0
         elseif left$(client_cmd,10)="SOUNDBANK:" then
             if client_cmd="default" then loadsoundbank "" else loadsoundbank mid$(client_cmd,11)
 
-        	if  _SNDPLAYING(musichandle) then
+            if _sndplaying(musichandle) then
 
                 ' a hack to make qb64pe load the midi file that is already loaded.
                 ' qb64 can't open the same file again with a new sound bank for some reason
@@ -416,7 +460,7 @@ while keyin<>27
     if nooutput=0 then
         tw=termwidth
         fixedwidth=uwidth(state)+uwidth(progress)
-        maxtitlewidth=tw-fixedwidth-2
+        maxtitlewidth=tw-fixedwidth
         currentsongwidth=uwidth(songname)
 
         if currentsongwidth>maxtitlewidth and maxtitlewidth>4 then
@@ -625,12 +669,9 @@ end function
 
 function ulen% (txt$)
     dim count%,i%,b%
-    count%=0
     for i%=1 to len(txt$)
         b%=asc(txt$,i%)
-        if (b% and &h80)=0 or (b% and &hc0)=&hc0 then
+        if (b% and &h80)=0 or (b% and &hc0)=&hc0 then count%=count%+1
-            count%=count%+1
-        end if
     next
     ulen%=count%
 end function
@@ -710,3 +751,35 @@ end function
 sub loadsoundbank (filename as string)
     _midisoundbank filename
 end sub
+
+
+function GetConfig$ (FileName as string)
+    select case left$(_os$,instr(_os$,"]"))
+        case "[WINDOWS]"
+            dim appdata as string
+            appdata=environ$("APPDATA")
+            if appdata="" then appdata=environ$("USERPROFILE")+"\AppData\Roaming"
+            if right$(appdata,1)<>"\" then appdata=appdata+"\"
+            GetConfig=appdata+FileName
+
+        case "[MACOSX]"
+            dim homemac as string
+            homemac=environ$("HOME")
+            if homemac="" then homemac="/tmp"
+            if right$(homemac,1)="/" then homemac=left$(homemac,len(homemac)-1)
+            GetConfig=homemac+"/Library/Application Support/"+FileName
+
+        case else ' Linux and other Unix-like systems
+            dim xdg as string,baseDir as string,homelinux as string
+            xdg=environ$("XDG_CONFIG_HOME")
+            if xdg<>"" then
+                baseDir=xdg
+            else
+                homelinux=environ$("HOME")
+                if homelinux="" then homelinux="/tmp"
+                baseDir=homelinux+"/.config"
+            end if
+            if right$(baseDir,1)="/" then baseDir=left$(baseDir,len(baseDir)-1)
+            GetConfig=baseDir+"/"+FileName
+    end select
+end function

readme.md

@@ -129,9 +129,8 @@ When interacting directly with the player interface terminal, use these keys:
 
 ## Supported Audio Formats
 
-All formats supported by QB64/QB64PE are supported by cimp, as QB64 handles the
+All formats supported by QB64PE are supported by cimp, as it handles the
-decoding. The following formats are supported by the most recent versions of
+decoding. The following formats are supported by the most recent version:
-both compilers:
 
 Audio files:
 `mod`, `xm`, `s3m`, `it`, `mid`, `mp3`, `ogg`, and `flac`
@@ -143,7 +142,7 @@ Sound banks:
 
 | File          | Description                                                                             |
 | ------------- | --------------------------------------------------------------------------------------- |
-| `cimp.bas`    | Main player — QB64-PE source handling client/server states and UI                       |
+| `cimp.bas`    | Main player - QB64 source handling client/server states and UI                          |
 | `terminkey.h` | C library for cross-platform raw keyboard input, IPC pipes/sockets, and terminal sizing |
 
 ## Notes